OPERAS Open Chats: Diamond Open Access und Open Access Geschäftsmodelle
...
-
-
Open Access Green and Gold
Intro Pathways to Open Access Source: open-access.network (2021), Pathways of Open Access ( CC BY 4.0 International ) The key takeaways from this article are 1 Basically, a distinction can be made between pathways to open access (green and gold) and financing options for open access (with or without publication charges). An additional pathway – diamond open access – is also often mentioned. 2 Green open access (also known as self -archiving) refers to making previously published works (possibly also the preprint or post-print version) freely available to the public in an institutional or disciplinary repository, or sometimes on the author’s personal website. 3 Gold open access refers to the publication of scholarly works in open access journals, as open access monographs, or as contributions to open access collections. As a rule, these works undergo the same quality-assurance process as closed access publications. Diamond open access is a subtype of gold open access that is financed without publication charges. Diamond open access publishing often has a community-driven, non-commercial background Green Open Access Source: Based on Oberländer, A. (2020). Open Access – Es ist nicht alles Gold, was glänzt. In: Open Science. Von Daten zu Publikationen. Zenodo. https://zenodo.org/records/4018594 ( CC BY 4.0 International ) Green open access – also known as self-archiving – refers to making a work published with a publisher available to the public in an institutional or disciplinary open access repository . It is sometimes understood to refer also to making such a work available on the author’s personal website. Self-archiving can take place at the same time as the publication of the content by the publisher or at a later date, and is possible for preprints and post-prints of scholarly articles, as well as for other document types, for example, monographs, research reports, and conference proceedings. "Zweitveröffentlichungsservices an Hochschulen. Bericht zur Erhebung" [Self-Archiving Services at Higher Education Institutions: A Report on the Survey] The report summarises key results of a survey conducted within the framework of the project open-access.network. Preprint and Post-Print Source: Shafee, T. (2020). Typical publishing workflow for an academic journal article (preprint, postprint, and published) with open access sharing rights per SHERPA/RoMEO. Own work; adapted from diagram by Ginny Barbour Wikimedia Commons ( CC BY 4.0 International ) Preprints Find an introduction here. A preprint is a scholarly publication that has not (yet) undergone peer review, which means that the quality of the work has not yet been conclusively assessed. The manuscript version of a text submitted for publication to a journal or a publisher is sometimes also referred to as a preprint. In contrast to a preprint, a post-print is a text that has already undergone peer review and has been accepted for publication. There are two types of post-prints. On the one hand, a post-print may be completely identical with the publisher's version, or the version of record . On the other hand, the content may be the same, but the formatting, layout, or pagination may be different. In the latter case, the post-print is referred to as the author’s accepted manuscript (AAM) version. The willingness of publishers to allow self-archiving of post-prints or preprints varies considerably. The Open Policy Finder database provides an overview of the rights that publishers grant their authors in this regard. Under German copyright law, authors are allowed under certain conditions to make post-prints available to the public, irrespective of whether the publisher agrees to this. This is known as the Zweitveröffentlichungsrecht . Practical tip Looking for a suitable repository? Lists of open access repositories can be found in the Directory of Open Access Repositories (Open DOAR) and the Registry of Open Access Repositories (ROAR). Variants of Green Open Access In discussions on open access, three ways of providing green open access are distinguished. First, the works can be made available in institutional repositories. In this case, authors have the possibility of depositing their scientific texts on a trans-disciplinary document server operated by their institution (e.g., university). Second, the works may be made available in disciplinary repositories – that is, repositories that host output from a particular subject area (e.g., a specialist discipline), irrespective of the institutions to which the authors belong. A third variant is to deposit scholarly documents on one’s own personal website. However, this approach means that the deposited documents are not, as a rule, as visible as they would be if they were archived in an institutional or disciplinary repository. Moreover, their long-term availability is not assured, which is why this type of self-archiving is often not recognised as open access. This is the case, for example, in the Berlin Declaration on Open Access to Knowledge in the Sciences and Humanities . A list of open access repositories can be found in the Directory of Open Access Repositories ( OpenDOAR ) and in the Registry of Open Access Repositories ( ROAR ). Gold Open Access Open access publishing – also known as gold open access – refers to the first publication of scholarly works as articles in open access journals , as open access monographs , or as contributions to open access edited volumes or conference proceedings. These texts usually undergo the same quality assurance process as closed access works, mostly in the form of peer review or editorial review. As a rule, a publishing agreement is concluded with the publisher. It specifies the rights of use that the author grants to the publisher, and the conditions of use that shall apply to the open access documents. Such agreements are often supplemented with an open access publication licence under which the authors can grant users more extensive and precisely specified rights. Source: Based on Oberländer, A. (2020). Open Access – Es ist nicht alles Gold, was glänzt. In: Open Science. Von Daten zu Publikationen. Zenodo. https://zenodo.org/records/4018594 ( CC BY 4.0 International ) Financing Both open access and closed access publications have to be financed. The options for financing open access publications are comparable to those used to finance closed access publications: sales of printed copies; unpaid support from the scientific community, scientific institutions, and volunteers; and advertising or sponsoring. Sometimes cross-financing also occurs. In particular, commercial publishers that want to try out the gold open access business model finance new journals with revenue from their subscription business . Although publication fees , or article processing charges (APCs; in the case of monographs, book processing charges, BPCs), are sometimes cited as a typical gold open access financing model, they are also widespread in closed access publishing ( Gutknecht, 2018 ). APCs are payable per accepted and published article and can be combined with institutional memberships. If publishing authors belong to an institution that has an institutional membership with an open access publisher, that institution will cover the publication fees in full or in part. In addition, many institutions provide further possibilities of reimbursement of these costs, for example, via publication funds . Research Funders and Open Access Find an introduction here. Business Models for Open Access Books Find an introduction here. Business Models for Open Access Journals Find an introduction here. Video on the Funding of Open Access Articles Source: Becklas Dorow, C., Hauss, J. (2026). Funding Open Access Articles – What Are the Options?. Technische Informationsbibliothek (TIB), open-access.network. https://doi.org/10.5446/73596 ( CC BY 3.0 DE ) Video zur Finanzierung von Open-Access-Monographien Quelle: Becklas Dorow, C., Hauss, J. (2026). Open-Access-Artikel finanzieren – welche Wege gibt es?. Technische Informationsbibliothek (TIB), open-access.network. https://doi.org/10.5446/73319 ( CC BY 3.0 DE ) Diamond Open Access If an open access publication does without publication charges completely – in other words, if it is free of charge for readers and does not charge authors a fee to publish – this special type of gold open access is known as diamond open access . In addition, diamond open access publishing often has a scholar-led , non-commercial background. The main idea behind this model is to create independent publication infrastructures that remain permanently in the hands of the scientific community, as the German Science and Humanities Council (Wissenschaftsrat) proposed in its recommendations on the sovereignty and security of science in the digital space ( Wissenschaftsrat, 2023 ). More information on the relationship between diamond and gold open access, and a discussion of the various definitions of diamond open access, can be found in Dellmann et al. (2022) . The project CRAFT-OA ( Armengou et al., 2024 ) has proposed a broader definition of diamond open access. The OA Diamond Journals Study by Bosman et al. (2021) discussed the potential and challenges of such publication formats – especially for journals – and showed that diamond open access journals often rely on voluntary work and usually finance their publications via consortial models , institutional funding, crowdfunding, or membership models (see pp. 117–118). Overviews of the German and Swiss diamond open access landscapes can be found in Hahn et al. (2022) and Taubert et al. (2024) . The diamond open access model is also increasingly coming into focus in the area of book publishing. Initiatives such as the Open Book Collective (OBC) organise collective funding by research organisations so that publishers and publishing service providers can forgo book processing charges ( BPCs ). In addition, many university presses offer authors an opportunity to publish free of charge. This offer is often open also to non-members of the respective institutions. To promote diamond open access as a fair, scholar-led , and non-commercial variant of open access, and to link up initiatives, UNESCO initiated the Global Diamond Open Access Alliance in 2024. At EU level, the Council of the European Union recommended in 2023 that diamond open access be promoted ( Council of the European Union, 2023 ). In 2025, the European Diamond Capacity Hub (EDCH) was established to coordinate and link up the existing diamond open access initiatives at European level. In Germany, the German National Academy of Sciences Leopoldina published a discussion paper in 2025 presenting a concrete proposal for the funding and evaluation of diamond open access journals. The same year saw the launch of the DFG -funded German national Service Centre for Diamond Open Access (SeDOA) , which aims to promote the further development of diamond open access publication infrastructures. In this pursuit, enquiries regarding publication projects are forwarded to existing diamond open access publication infrastructures, and services such as a registry of diamond open access journals in the German-speaking area are being built. At the same time, SeDOA is the National Capacity Centre (NCC) for the EDCH. Diamond Open Access Standard (DOAS) Der Diamond Open Access Standard formuliert Qualitätskriterien für Diamond-Zeitschriften. Er wurde vom DIAMAS-Projekt erarbeitet. Source: Based on Oberländer, A. (2020). Open Access – Es ist nicht alles Gold, was glänzt. In: Open Science. Von Daten zu Publikationen. Zenodo. http://doi.org/10.5281/zenodo.4018594 ( CC BY 4.0 International ) Akteure der Diamond-Open-Access-Community: Sechs Akteursgruppen und ihre individuellen Beiträge zu einem fairen und gemeinschaftlichen Diamond Open Access. Quelle: Henkes, L. M., & Holscher Blackman, K. (2025). Wissenschaftliches Publizieren neu denken. Blaupause für gemeinschaftliches und faires Diamond Open Access. Zenodo. https://doi.org/10.5281/zenodo.17240865 ( CC BY 4.0 International ) Middle Ways There are also gradual intermediate positions between gold and green open access. For example, the social science repository Social Science Research Network (SSRN) allows authors both to make their already published journal articles available in open access and to post and share the preprint versions of their manuscripts and submit them to SSRN partner journals. The epijournals , or overlay journals ( Gowers, 2015 ), in mathematics are another example. These are open access journals that use the infrastructure of preprint servers or repositories. Authors deposit the preprint versions of their manuscripts in arXiv or Hyper Articles en Ligne (HAL) and then submit them for publication to one of the epijournals. If a submission is accepted after peer review, the original preprint version continues to remain available alongside the publisher’s version. Some Copernicus Publications and F1000 journals operate according to a similar principle, with open peer review. Closed access publishers use arXiv in a similar way by enabling manuscripts deposited there to be automatically ingested into their own submission workflows. Depositing a preprint of an article in an open access repository before publishing it with a publisher also has characteristics of gold and green open access. Publishing documents such as dissertations or publication series for the first time in a repository is also a kind of hybrid form of gold and green open access. Because the works are being published for the first time, the publication can be regarded as gold open access. However, publication takes place in repositories, which are normally used to provide green open access to works. Besides green and gold open access publications, other variants are sometimes assigned colour symbols, too ( Piwowar et al., 2018 ; Schmeja, 2018 ). These publications may not be open access in the strict sense, for example, when a journal article can be read free of charge but is not reusable in the long term. Video zum Open-Access-Regenbogen Quelle: Schmeja, S. (2020). Der Open-Access-Regenbogen, open-access.network. https://doi.org/10.5446/49667 ( CC BY 3.0 DE ) Open Access Publishing Find an introduction here. Where and How to Publish Open Access? Here is an introduction to open access. Open Access Helpdesk Ask your specific questions about open access here. Forum Do you have a question? Would you like to discuss open access-related aspects with others? Please feel free to use our forum. References Armengou, C., Bargheer, M., Gingold, A., Holsinger, S., Laakso, M., Mitchell, D., Mounier, P., Pölönen, J., Rooryck, J., Ševkušić, M., Souyioultzoglou, I., & Varachkina, H. (2024). Operational Diamond OA criteria for journals . DIAMAS and CRAFT-OA projects. https://zenodo.org/records/12721408 Bosman, J., Frantsvåg, J. E., Kramer, B., Langlais, P.-C., & Proudman, V. (2021). OA Diamond Journals Study. Part 1: Findings. https://doi.org/10.5281/zenodo.4558704 . Council of the European Union (2023). Council conclusions on high-quality, transparent, open, trustworthy and equitable scholarly publishing. Dellmann, S., van Edig, X., Rücknagel, J., & Schmeja, S. (2022). Facetten eines Missverständnisses. o-bib 9 (3). https://doi.org/10.5282/o-bib/5849 Gowers, T. (2015, September 10). Discrete Analysis - an arXiv overlay journal. Gowers’s Weblog . https://gowers.wordpress.com/2015/09/10/discrete-analysis-an-arxiv-overlay-journal Gutknecht, C. (2018, January 8). Publikationskosten für Closed-Access: die verschwiegenen APCs. Wisspub.net . https://wisspub.net/2018/01/08/apcs-von-denen-fast-niemand-spricht/ Hahn, D., Hehn, J., Hopp, C., & Pruschak, G. (2022). Mapping the Swiss landscape of diamond open access journals. The PLATO study on scholar-led publishing . https://doi.org/10.5281/zenodo.7461728 Piwowar, H., Priem, J., Larivière, V., Alperin, J. P., Matthias, L., Norlander, B., Farley, A., West, J., & Haustein, S. (2018). The state of OA: a large-scale analysis of the prevalence and impact of Open Access articles. PeerJ , 6, e4375. https://doi.org/10.7717/peerj.4375 Schmeja, S. (2018, October 24). Gold, Grün, Bronze, Blau...: Die Open-Access-Farbenlehre. TIB-Blog . https://blogs.tib.eu/wp/tib/2018/10/24/gold-gruen-bronze-blau-die-open-access-farbenlehre/ Taubert, N., Sterzik, L., & Bruns, A. (2024). Mapping the German Diamond Open Access journal landscape. Minerva , 62 (2), 193–227. https://doi.org/10.1007/s11024-023-09519-7 Wissenschaftsrat (2023). Empfehlungen zur Souveränität und Sicherheit der Wissenschaft im digitalen Raum. https://doi.org/10.57674/m6pk-dt95...
-
Publishing Open Access Journal
Intro Academic Publishing: Open Access Gold Source: based on Oberländer, A. (2020). Open Access – Es ist nicht alles Gold, was glänzt. In: Open Science. Von Daten zu Publikationen. Zenodo. http://doi.org/10.5281/zenodo.4018594 ( CC BY 4.0 International ) The key takeaways from this article are 1 An open access journal can be published in different ways: it can be run independently, published at a research performing organisation, or with the help of a publishing house. 2 When starting an open access journal, roles and responsibilities should be clearly defined from the very beginning. 3 Overlay journals use the technical infrastructure of preprint servers. As in the case of other types of journals, an editorial team takes care of other processes, for example peer review. Starting and Publishing an Open Access Journal Open access journals are freely available – immediately and to all interested parties. This has various advantages for authors, readers and the academic community. But how are open access journals published? And what should be considered when starting an open access journal? This article addresses important points that should be considered when starting and publishing an open access journal. Many of these points are also of relevance when converting an existing journal to open access ( Journal Flipping ). What are Open Access Journals? Find an introduction here. Converting Journals to Open Access Find here more information about "journal flipping" (the conversing of an existing journal to Open Access). Praxistipp Beitritt zum Editorial Board einer bestehenden Zeitschrift: Ja oder Nein? Diese Handreichung liefert Kriterien zur Entscheidungsfindung: https://zenodo.org/records/12801460 . Concept First of all, in view of the editorial effort required, you should consider whether publishing your own journal is plausible within the limits of your resources. You should also find out whether and to what extent existing journals already cover the subject area of your planned journal. To do so, you can consult, among other things, the Directory of Open Access Journals (DOAJ) , the German Union Catalogue of Serials (ZDB) , and JSTOR . Against this backdrop, you should then consider whether starting a new journal actually makes sense ( Pilaar Birch, 2014; Blechl et al., 2016 ). Depending on the existing situation, it may be more plausible to assume a role in an existing journal or to encourage the conversion of a closed access journal to open access. In the case of a start-up, you should ask yourself the following questions, which will help you to develop a concept (Blechl et al., 2016; Pilaar Birch, 2014; van Edig & Rücknagel, 2021; Kaier & van Edig, 2020; K, 2021) : How can my journal fit in with the existing range of journals in terms of topic and target group? After finding a thematic niche in the existing range of journals, you should determine whether the interest of researchers in the niche topics is sufficient for the scope of a new journal. To this end, you should define and analyse the potential readership. If you conclude that the establishment of a journal makes sense, it is advisable to draft a mission statement, which will appear on the journal website. It should be the length of an abstract and should present the unique thematic features of your journal. What expenditure and revenue are to be expected? To help those thinking of starting an open access journal to develop a business plan, SPARC Europe provides the New Business Plan Toolkit for OA Journals . As a basis for negotiations with potential funders , it is advisable to plan the first three years in advance. The legal form of the journal should be considered, and a financial buffer should be included in the plan. It is advisable to draft a written concept with essential project information. How can the journal be run in the long term? Share the tasks and responsibilities so that as many team members as possible develop expertise in different areas. Document processes in order to conserve knowledge. Long-term preservation is important because it is the best way to ensure the permanent availability of the content. If your own institution does not operate a professional long-term preservation service of its own, all contributions should be archived externally. Examples of professional long-term preservation services include LOCKSS / CLOCKSS and Portico . Ideally, these services offer to transfer, or migrate, content into other (modern) formats should the existing formats become obsolete Content should be migrated into open, machine readable formats. Do I aspire to have an international reach? Decide on the language or languages in which your content and the information about your journal should be available. English-language journals tend to be noticed more and to reach a wider readership. If you want to publish in other languages, you should check whether your journal can reach your target group. What should I call my journal? Find a concise title and an abbreviation for your journal. Avoid special characters, such as ß . It is also important that the title is tailored to the desired target group. Via the serials directory UlrichsWeb , or other search engines, you can find out whether your desired title is still available. As UlrichsWeb is a subscription-based service, you should ask your library whether they can help you access it. Also for ethical reasons, the name should be chosen in such a way that it is not possible to confuse it with the names of other journals. Who exactly should the editor or the owner of the journal be? The editors determine the scientific focus of the journal and usually decide which contributions should be published. In many cases, the editors are scholars who work on a voluntary basis, However, some open access journals work with permanently employed editors. In most cases, however, editorial boards act as editors. Editorial boards are often hierarchically organised and divided into areas of responsibility (chief editor, managing editor, handling editor, etc.). Further details can be found, for example, in Kaier und van Edig (2020) . The ownership of the journal may lie with the editors themselves, with institutions (e.g. universities or professional associations), or with publishers. How can I find co-publishers, members of the editorial board, authors, etc? Although renowned researchers often have only very little time to give, the participation of established academics in the editorial board is highly recommended in order to increase the visibility of your journal. You should therefore start searching as early as possible. Ideally, your editorial board should consist of individuals from different institutions, and – especially in the case of a journal with an international focus – it should include persons of different nationalities. It is important that the journal is affiliated with several stakeholders; too strong an affiliation with individual persons can lead to relationships of dependency. All members of the editorial board should be listed on the journal website with their full names, affiliations, email addresses, research focuses, and, if applicable, links to their websites. Especially in the start-up phase, an adequate number of high quality contributions by renowned authors can build up the reputation of a journal. Do some research, or ask around in professional circles, to find out who would be suitable as authors for your journal, and then actively approach them. You have good prospects of success especially with academics who have reached a point in their careers where they are no longer completely dependent on publishing in already renowned journals. A further possibility is to begin with a small group of renowned contributors, who will attract other renowned contributors over time. It should be borne in mind that the reputation of a journal and its contributors still plays an important role in many disciplines. The Journal Impact Factor is still also of importance in some disciplines. However, a Journal Impact Factor cannot be obtained from the very start, but rather only after meeting various criteria, providing proof of a relatively long publishing history, and undergoing laborious evaluation. The high visibility of a journal ensures increased visibility of its articles. This also enhances the standing of the authors in – and possibly beyond – their disciplinary communities. Who is responsible for what? Responsibilities and competences should be clearly defined. This is especially important when several institutions are participating in the journal, or when external services are used. Clear roles and responsibilities are also important within the editorial board – this point is addressed in more detail in the Editorial Planning section below. How do I connect my journal to the open access community? Consider becoming a member of the Open Access Scholarly Publishing Association (OASPA) and the Committee on Publication Ethics (COPE) . For internationally oriented start-ups from the humanities and social sciences, membership of the Radical Open Access Collective is also an option. To fulfil recognised open access criteria with regard to access and reusability , your journal should comply with the following standards and requirements: Berlin Declaration on Open Access to Knowledge in the Sciences and Humanities The Principles and the Technical Guidance and Requirements of Plan S The DOAJ Seal What contributions will my journal publish? The types of contributions that the journal will publish must be specified – for example research articles, systematic reviews and meta-analyses, or book reviews. It should be considered whether individual issues should have a thematic focus. It is advisable to make research data – for example measurement results or interview transcripts – available as supplementary materials to the contributions in your journal (Hrynaszkiewicz et al., 2020) . These data enable not only peer reviewers but also readers to better understand and check the contributions. It is advisable not only to "store" these data in the journal itself, but also to inform the authors about suitable data repositories such as Zenodo or the Registry of Research Data Repositories, re3data.org . What licensing aspects must be considered? Under what terms and conditions should the contributions be reusable? Authors should not transfer exclusive exploitation rights in their contributions to the publishing institution (e.g. a publisher). With regard to distribution and reuse, it is advisable to make contributions available under the current version of the Creative Commons Attribution licence, CC BY , because this licence type complies with Plan S and restricts reuse the least. In the case of other CC licence variants (e.g. CC BY-NC), possible negative effects must be considered. It should be transparently stated – in the metadata, on the landing page, and in the article itself – what licence is used. On our Open Access and Reuse page , you will find detailed information on open licences such as the Creative Commons licences. Further legal aspects are addressed on our Legal Questions pages. What quality assurance procedures (e.g. [open] peer review, editorial review) will be used? On what criteria should the quality assurance procedure be based? Peer review is the most well-known quality assurance procedure. It is still often conducted anonymously, for example in the following forms: Double-blind peer review: The reviewers do not know the names of the authors and vice versa. Single-blind peer review: The identities of the authors are known to the reviewers but not vice versa. However, open peer review procedures are becoming more common ( Ross-Hellauer, 2017 ), for example in the case of overlay journals . Also common are editorial reviews, where the assessment of the article is carried out by one or more members of the editorial staff ( Lange, 2021 ). When choosing a procedure, standard quality assurance practices in the field in which the journal is located should be taken into account. After all, the journal is dependent on the support of the community, and thus on its acceptance. You should also find out what staff capacities are needed for each procedure, whether these capacities are available, and whether enough reviewers can be found. In any case, precise assessment criteria should be defined, and a maximum duration of the review process stipulated, which should not be longer than a few months. Research data, software, and other supplementary materials should be included in the first submission of the manuscript and made available to the reviewers. In the interest of transparency, the reasons for using the respective quality assurance procedures should be explained on the journal website. Moreover, you should consider offering authors the possibility of naming undesired reviewers. And finally, it is essential that you check submissions for plagiarism. Open source software for this purpose is uncommon. iThenticate.com is often mentioned as a suitable commercial plagiarism detection service. Is there a demand for an additional print edition? You should find out whether demand for an additional print addition exists in the field in which your journal will be located. Although, generally speaking, demand for print editions is declining, it still exists, for example, in the humanities, although even there it is declining further. Bear in mind that printing even a few copies makes demands on administrative capacities that should not be underestimated, and consider whether it is worth the effort. Consider also that some of the added value of the digital publication (e.g. the direct linking with data) will be lost, and that therefore the question arises of whether a print edition is in keeping with the times. How do I increase awareness of my journal? It is essential that the content of your journal is easily findable via indexing services and search engines. Contributions and comprehensive metadata should be exposed via interfaces such as OAI-PMH or SWORD immediately after publication, so that they can be automatically processed at repositories. This is not only in the interests of long-term preservation but also of visibility. Within the framework of the DOI registration of an article (addressed in detail in the Editorial Planning section ), Crossref and DataCite each provide a metadata schema. Metadata may be reused under a CC0 licence. Only with such visibility is there a prospect that the articles in your journals will be frequently cited, which is essential especially for the reputation of early career researchers. This is the only way of sustainably establishing the journal in professional circles. In addition, the following ways of increasing the visibility of your journal exist: News: Publish regular news relating to your journal. Newsletter: Many readers like to keep up to date by newsletter. Social media: Twitter and possibly Facebook are suitable platforms for publicising your content. Post-publication tools: These tools (e.g. the comments function) encourage your readers to interact with each other and to discuss your content. RSS feeds: With the help of RSS feeds, interested users can collect current notifications. This option is directly included in most content management systems, and just has to be configured. Blogs: Blog articles can supplement journal contributions and report on current topics. To facilitate the exchange of views, the inclusion of a comments function is recommended. Moreover, if appropriate, blog articles can be linked to journal contributions. It is important that communication with the scientific community functions well – concerns and interests of readers and authors should be collected and incorporated time and again into the substantive concept of the journal. It is advisable to publish the handling of readers’ concerns and interests on the website. All these measures result in (potential) readers and authors feeling that they are being addressed. These measures should be prepared in good time because potential staff members and funders will make their participation contingent upon your position on these points. In addition, the concept has an impact on all framework conditions and work processes and must therefore be defined so that the editorial process flows smoothly. What will happen to the content in the worst case? You should make a plan as to what will happen to the content should your journal cease to exist. For authors, readers, and the scientific record, it is extremely important that published content should remain available in the long term. This aspect was addressed as early as 2003 in the Berlin Declaration on Open Access to Knowledge in the Sciences and Humanities. When registering DOIs, journals undertake to ensure that metadata and content will remain accessible via these identifers. Should a journal cease to operate, it should therefore be made clear whether the journal infrastructure can continue to make the published content available or whether this is possible via a long-term archive or repository. In any case, a situation where the content disappears overnight must be avoided. Editorial Planning Before work can begin on the texts, several editorial framework conditions should be defined (Blechl et al., 2016; van Edig & Rücknagel, 2021; K, 2021) : Editorial Roles and Responsibilities Responsibilities and decision-making competences should be defined: What roles and levels exist in my/our journal (e.g. editorial board; editorial staff; copy editors and proofreaders; typesetters; main contact persons for the authors; if applicable, review board)? Besides the linguistic quality of the articles, attention should be paid to their visual appearance so that the journal will be perceived as reputable. Standard layouts should be specified for all file formats – various typesetting systems, for example LaTeX , provide support with this. Moreover, you should keep an eye on current developments, so that the layout of the journal remains contemporary. In principle, it is possible to outsource the typesetting, but that costs money. And finally, guidelines must be established for peer reviews, conflicts of interest, and scientific misconduct. The Committee on Publishing Ethics (COPE) Guidelines can serve as a guide in this regard. Planning the Number of Contributions The number of contributions that will be published per year should be specified. To be recognised as a proper journal, at least five contributions a year are advisable. Even though, in many respects, open access journals without print editions have fewer constraints than their closed-access counterparts, it makes sense in terms of staff capacity to plan the number of contributions. It should be considered whether traditional, discrete, issues should be published, or whether contributions should be published on a rolling basis – that is, as soon as the editorial process is completed. If you decide against publishing discrete issues, the individual contributions should be consecutively numbered, and at least one contribution should be published per quarter. Manuscript Submission Guidelines The desired manuscript length should be specified for each contribution category. A policy that gives the authors precise manuscript submission guidelines and explains what must be observed (e.g. file format, structure, referencing style) is advisable. Ideally, publications should be provided in the following formats: HTML for good on-screen readability PDF/A for printing (by users themselves) XML for machine processing ePUB for ebook readers Furthermore, you have to decide whether multimedia presentations, tables, graphs, images, or audio materials will be possible. It must also be decided whether it will be possible to enrich texts with data or link them to data on other servers. Technical Implementation and Design of the Website It is advisable to choose a domain name that is easy to remember (possibly in consultation with the IT department of your institution). In order to be perceived as a reputable journal, a professional web design should be used (if necessary with the support of external partners). If you are publishing your journal with a publisher or at your institution, talk to them about this. When designing the website, it is essential to ensure that is barrier free, so that it can be used easily by people with hearing, visual, or motor disabilities. It is advisable to use the technical standard Web Content Accessibility Guidelines (WCAG) 2.0, Level AA . At least one of the formats used (HTML, PDF, etc.) should comply with this standard. Workflows of the Publication Process The editorial team should define internal workflows, including a timeline for editorial work (calls for submissions, peer reviews, copy editing, etc). Core elements should be clearly communicated to the authors. In addition, the authors should be kept informed of the current status of their submissions. Journal management software, such as OJS, provides support with this. Indexing and Integration into Value-Added Services To ensure the findability of content, your journal should be successfully integrated into value-added services such as the Directory of Open Access Journals (DOAJ) , the Web of Science , Scopus and Sherpa Romeo . To this end, you should submit an application to these services. If evaluation is successful, your journal will be indexed. For successful evaluation by these services, the respective criteria for acceptance must be observed. Bear in mind that it can take a long time for the evaluation process to be completed. It is important to provide transparent information on the journal, the publishers and editors, the website, and – in the case of non-English-language journals – metadata. Information on DOAJ compliance can be found her e. Information on other services can be found on their respective websites and in Chapter F of Blechl et al.’s German-language guide ( 2016 ). Some indexing services require that non-English-language contributions should also include an English-language title and abstract. You should apply for an ISSN (International Standard Serial Number) for your journal via ISSN.org . If the title of your journal changes, you will have to request a new ISSN. As a rule, an ISSN is not assigned until the first issue has been published. It is advisable to enquire in advance whether the ISSN will be listed in the ISSN International Portal. If a regular print edition is not planned, you should apply only for an ISSN (Online). The ISSN assigned to the online version can also be used for print-on-demand issues. It is important that all contributions are assigned metadata, DOIs, and keywords. Further details can be found on page 7 and seq. of Blechl et al.’s German-language guide ( 2016 ). In order to achieve a maximum reach, all metadata should be OAI-PMH compliant , thereby enabling them to be harvested by disciplinary databases and search engines. Journal management systems, such as OJS, provide plugins for the automatic generation of OAI-PMH-compliant metadata. ORCiD IDs enable authors to be uniquely identified. Besides unique identification in the research context, this unique identification is also important for internal processes at the institutions where the authors work. You should therefore give authors the possibility of linking their articles to their ORCiD ID. ORCiD IDs can be registered free of charge. Via the Research Organization Registry ( ROR ), institutional affiliations can be uniquely identified by means of a persistent identifier. ROR IDs can be applied for free of charge. Metrics and Statistical Data In the interests of transparency, readers should be given access to journal-level citation metrics, such as the Journal Impact Factor (JIF), the Source Normalized Impact per Paper (SNIP), and the SCImago Journal Rank (SJR). Moreover, it is advisable to also make article-level metrics (ALMs) available to enable readers to find out how many accesses or downloads an article receives. In addition, via so-called altmetrics, mentions of the contributions in social media and scholarly networks can be statistically analysed. Provided you use DOIs, OJS has a plugin for this. And finally, it is advisable to communicate the number of submitted, accepted, and rejected manuscripts, as well as the average time from submission to publication, so that authors know what processing time to expect. Notifications to Collecting Societies Authors of articles in digital journals can also receive royalties from collecting societies. In Germany and Austria, contributions must be assigned a counter from the collecting society VG Wort and must achieve a high number of accesses (e.g. VG Wort ). If you are interested, you can contact Literar Mechana in Austria or VG Wort in Germany. Practical tip Here you can find the slides of the Open Access Talk Founding journals - what do I need to think about? (in German) Practical tip Supporting Open Access – Practical Tips for Publishers and Journals (in German) gives concrete advice on how publishers can support open access. Practical tip The Wellcome Trust's Society Publishers Accelerating Open Access and Plan S toolkit provides tips on implementing Open Access and Plan S compliance. For OJS journals, the Public Knowledge Project provides the very useful Guide to Plan S compliance in OJS . Practical Tip The Open Access Journals Toolkit produced by DOAJ and OASPA is a good support for publishers of open access journals. It "covers topics across the entire journal development lifecycle and everyday operation, such as journal creation, costs, staffing, policy development, through to indexing and other technical aspects". Affiliation of the Journal Open access journals can be run within the framework of an existing offering or (largely) independently ( scholar-led publishing) . Affiliation with a publisher is one possibility; other options are to run the journal with the help of a university or a library or to publish it independently. Journals can also be published as so-called overlay journals (see below). When choosing a provider, the following aspects should be taken into account: Technical aspects Is there an editorial system? Are there possibilities to preserve content in the long term? Can the desired manuscript formats be processed? Financial aspects What does usage cost? What direct and indirect costs will arise (e.g. server operation, DOI assignment, personnel costs, external service providers)? Are the desired forms of financing supported? Service-related aspects What services are provided? What is the nature of the infrastructural integration with regard to metadata and the traceability of the content? Organisational and legal aspects Who will control the journal? Who will hold the rights in the journal title? If a publisher is involved: Will the publisher limit the open access orientation of the journal? Is separation from the publisher possible (e.g. regulation of the transfer of metadata and full texts)? When choosing a provider, you should critically assess your own resources – both in financial terms and with regard to the amount of work to be done ( van Edig & Rücknagel, 2021 ). You should not only ask yourself what and how much you can do yourself, but also how much freedom you wish to retain. If you want to publish your journal via a publisher, you should bear in mind that many things will be prescribed by the publisher – for example, the software, the funding model, and minimum standards that the quality assurance procedure must fulfil. If the publisher’s requirements are in line with your ideas, cooperation may be beneficial. In other cases, cooperation with a publisher can severely restrict the freedom of the editors. Scholar-led publishing is an alternative to cooperation with a publisher. If you wish to publish your journal at an institution, it is advisable to find out whether the journal can be hosted on the institution’s web server, whether the institution can make journal management software available to you, or whether a professional hosting service would be an option ( Blechl et al., 2016 ). Some institutions offer a specialised advisory service for these questions (e.g. CeDiS , Freie Universität Berlin). Hosting services are also provided by some specialised information services, for example the Specialised Information Service Linguistics , the Specialised Information Service Germanistik im Netz , the Specialised Information Service Comparative Literature , and the Specialised Information Service Classics, Propylaeum ( van Edig & Rücknagel, 2021 ). Practice Tip: Scholar-Led Publishing Scholar-led publishing can be implemented cost-effectively by means of open source software such as Open Journal Systems (OJS) . OJS undergoes continual further development; the source code is freely available; and the software, which is also available in German, can be used free of charge. The application supports the entire process of online publishing (submission, review, copy editing and proofreading, publication, commenting on published articles). Numerous templates, for example for communication with reviewers and authors, support the editorial work. Moreover, the software contains interfaces, so that metadata can easily be delivered to services such as the Directory of Open Access Journals ( Mruck et al., 2018 ). The German-language OJS Information Platform is the first contact point for German-speaking users when they have questions; it is also a place where OJS users interact. Further information can be found in the User Guide , which also includes an FAQ page. According to Martin Paul Eve ( 2012 ), inexperienced OJS users with average technical competence should “budget in a fair few hours” to install and configure the software. You should also bear in mind that the amount of time needed to actually publish a journal should not be underestimated. In particular the preparation of the content is a challenge for scholar-led journals. Scholar-led projects that operate the technical infrastructure themselves should engage with formal standards (see Section 3.3 in Bosman et al., 2021 ). Alternatives to OJS are Janeway and PubSweet ( van Edig & Rücknagel, 2021 ). The focus group scholar-led.network also deals with the topic; members jointly search for suitable models, and share experiences. Editorial process at Open Journal Systems (OJS) Source: OJS-net.de Focus group: Scholar-led.network Feel free to discuss developments in Scholar-led.network with experts. Overlay Journals A further option is to publish the journal as an overlay journal. Overlay journals use the infrastructure of preprint servers , such as arXiv , that are already well established in some disciplines, for example mathematics and physics ( Schmeja, 2016 ). Authors deposit their papers (in the usual way) on arXiv or another preprint server and submit them from there to the overlay journal, which takes care of peer review. If the paper passes peer review, it is included in the journal – that is, the journal posts a link from its website to the preprint server, assigns a DOI, and, if applicable, attaches an editor’s comment to the article ( Schmeja, 2016 ). One of the first overlay journals was the mathematics journal Discrete Analysis , which was founded in 2015 ( Gowers, 2015 ). open-access.network ( CC BY 4.0 International ) In any case, when establishing an open access journal, it is very advisable to seek the advice of your institution’s open access officer. The Fair Open Access Alliance (FOAA) is a further suitable point of contact. FOAA is a group of scholars and librarians that propagates and promotes the principles of Fair Open Access. It provides support – financially and otherwise – for the establishment of new journals. The FOAA can be contacted here . Moreover, the TIB – Leibniz Information Centre for Science and Technology and University Library , for example, provides the open access platform TIB Open Publishing , on which open access journals and conference proceedings can be published. And finally, it is advisable to engage with other publishers. The Free Journal Network (FJN) promotes scholarly journals run according to the principles of Fair Open Access , for example by sharing best practices and obtaining funding for its journals. By updating its acceptance criteria, it further aims to ensure that journals in the network continuously improve in quality. Open Access Helpdesk Ask your specific questions about Open Access here. Legal Aspects Find an introduction here. Open Access and funding organisations Find an introduction here. Covering Costs The production of open access journals in general, and overlay journals in particular ( Ball, 2015 ), is in part cheaper than print journals or toll-access electronic journals (Swan, 2016) . Besides savings from not having to print the journal, open access publishers also have savings, for example, from not having to handle subscriptions or identify (non-)authorised users. Because open source software, such as OJS, is often used to run the journal, or, in the case of overlay journals, the infrastructure of preprint servers is used, the software costs are usually low. Options for Covering the Costs of an Open Access Journal The options for covering the costs of an open access journal are as follows (Budapest Open Access Initiative, 2002; Blechl et al., 2016, van Edig & Rücknagel, 2021) : Funding from private, state, or disciplinary research funding organisations Funding from the institutions (e.g. universities) at which the authors are employed Cross-financing, for example by conferences Consortial funding (see Knowledge Unlatched or projects such as KOALA) Donations (e.g. from institutions, individuals, crowdfunding) Advertising revenue (to this end, draw up an advertising policy) Article processing charges (APCs) payable by authors or their institutions. As these charges create barriers for authors, other funding options should be chosen where possible. It is important to provide exact details of how the costs arise and of the APC per contribution. Moreover, the time point of invoicing should be clearly communicated. Discounts, for example for authors from low-wage countries, should be considered. Especially when you want to avoid costs for authors, it is very advisable to seek support from research funding organisations or consortial funding. Details of the funding model used by the journal should also be provided on the website. References Ball, P. (2015). The journal that publishes no papers. Mathematics journal ‘overlays’ arXiv preprint server . Nature. 526 , 146. https://www.nature.com/news/polopoly_fs/1.18444!/menu/main/topColumns/topLeftColumn/pdf/526146a.pdf Blechl, G., Ferus, A., Gorraiz, J., Haas, I., Haslinger, D., Holzner, B., Schiller, R., Schmidt, N., & Stöger, H. (2016). Checkliste zur Herausgabe von Open Access Zeitschriften an Forschungseinrichtungen (Version 2) . Open Access Netzwerk Austria (OANA). https://www.akbild.ac.at/de/forschung/open-access/die-ag-open-access/OANAChecklisteOAJournals_Version2.pdf Bosman, J., Frantsvåg, J. E., Kramer, B., Langlais, P.-C., & Proudman, V. (2021). The OA Diamond Journals Study. Exploring collaborative community-driven publishing models. Zenodo. https://doi.org/10.5281/zenodo.4558704 Budapest Open Access Initiative . (2002). https://www.budapestopenaccessinitiative.org/translations/german-translation Eve, M. P. (2012, July 11). Starting an Open Access Journal: a step-by-step guide part 2. Eve.Gd . https://eve.gd/2012/07/11/starting-an-open-access-journal-a-step-by-step-guide-part-2/ Gowers, T. (2015, September 10). Discrete Analysis - an arXiv overlay journal. Gowers’s Weblog . https://gowers.wordpress.com/2015/09/10/discrete-analysis-an-arxiv-overlay-journal/ Hrynaszkiewicz, I., Simons, N., Hussain, A., Grant, R., & Goudie, S. (2020). Developing a research data policy framework for all journals and publishers. Data Science Journal , 19 (1), 5. https://doi.org/10.5334/dsj-2020-005 K, S. (2021, July 7). How to Start an Open-Access Journal. Typeset.io . https://typeset.io/resources/how-to-start-an-open-access-journal/ Kaier, C., & van Edig, X. (2020). Publizieren in wissenschaftlichen Zeitschriften. In K. Lackner, L. Schilhan, & C. Kaier (Eds.), Publikationsberatung an Universitäten (pp. 53–78). transcript. https://doi.org/10.14361/9783839450727-004 Lange, J. (2021, July 28). Scholarly Journal Publishing Guide. Resources for McGill journal editors . https://libraryguides.mcgill.ca/journalpublishing/typesofreview Mruck, K., Mey, G., & Muhle, F. (2018). Wissenschaft als Publikationspraxis. In Eigenregie verlegte Zeitschriften: das Beispiel Forum Qualitative Sozialforschung/Forum: Qualitative Social Research (FQS). Erziehungswissenschaft , 57 (29), 43–51. https://doi.org/https://doi.org/10.3224/ezw.v29i2.06 Pilaar Birch, S. (2014, September 18). Essential Guide: How to start an Open Access journal in five steps. LSE Impact Blog . https://blogs.lse.ac.uk/impactofsocialsciences/2014/09/18/how-to-start-an-open-access-journal/ Ross-Hellauer, T. (2017). What is open peer review? A systematic review. F1000 Research . https://doi.org/10.12688/f1000research.11369.2 Schmeja, S. (2016). arXiv-Overlay-Journals: Das Beste aus zwei Welten. TIB Blog . https://blogs.tib.eu/wp/tib/2016/08/17/arxiv-overlay-journals-das-beste-aus-zwei-welten/ Swan, A. (2016). The costs and benefits to the research community of Open Access: A briefing paper . PASTEUR4OA. https://doi.org/10.5281/zenodo.51867 van Edig, X., & Rücknagel, J. (2021, May 27). Open-Access-Zeitschriften gründen – woran muss ich denken? Open Access Talk. https://doi.org/10.5281/zenodo.4836220 Further Reading Bakker, C. (2012). Developing open access journals: a practical guide by David J. Solomon. Journal of Librarianship and Scholarly Communication 1(1). https://doi.org/10.7710/2162-3309.1028 Birch, S.P. (2014, September 18). Essential guide: how to start an Open Access journal in five steps. Impact of Social Sciences. http://blogs.lse.ac.uk/impactofsocialsciences/2014/09/18/how-to-start-an-open-access-journal/ Hansen, C. R., Thestrup, J. B., Riise, R. R., Iversen, R. K. M., & Johnsen, S. S. (2023). An offer the journal couldn’t refuse. How a Danish collaborative project paves the way for DOAJ inclusion. Nordic Perspectives on Open Science , 8 . https://doi.org/10.7557/11.7001 Henkes, L. M., & Holscher Blackman, K. (2025). Wissenschaftliches Publizieren neu denken. Blaupause für gemeinschaftliches und faires Diamond Open Access . ELADOAH. https://doi.org/10.5281/zenodo.17240865 Jamali, H. R., Wakeling, S., & Abbasi, A. (2022). Why do journals discontinue? A study of Australian ceased journals. Learned Publishing , 35 (2), 219–228. https://doi.org/10.1002/leap.1448 Mruck, K., Mey, G., & Muhle, F. (2018). Wissenschaft als Publikationspraxis. In Eigenregie verlegte Zeitschriften: das Beispiel Forum Qualitative Sozialforschung/Forum: Qualitative Social Research (FQS). Erziehungswissenschaft, 29(2), 13-14. https://doi.org/10.3224/ezw.v29i2.06 Open Access Directory (2019). OA journal business models. http://oad.simmons.edu/oadwiki/OA_journal_business_models Shieber, S. (2013, November 21). Thoughts on founding open-access journals. The Occasional Pamphlet. http://blogs.law.harvard.edu/pamphlet/2013/11/21/thoughts-on-founding-open-access-journals/ Wenaas, L. (2021). Attracting new users or business as usual? A case study of converting academic subscription-based journals to open access. Quantitative Science Studies , 2 (2), 474–495. https://doi.org/10.1162/qss_a_00126...
